How to Clean a Pax Vaporizer

There are a couple different ways to clean your Pax, but they are all the same. First, insert a pipe cleaner into the vapor pathway. Then, pull out the internal oven screen, which is the silver piece of metal that covers the top of the vaporizer. Once you’ve removed the screen, use rubbing alcohol to wipe it down. Pour the rubbing alcohol into a small cup and apply it to the screen while cleaning the Pax.

how to clean pax

Then, rinse out the mouthpiece and parts of the PAX with water. You can also use a multi-tool or a fingernail to gently lift it out. Then, use soapy water and isopropyl alcohol to wipe down the vaporizer’s parts. Using any other products to clean your PAX will void its warranty and will result in damage to the device. To dry the mouthpiece, simply place it back in its place and run it under warm water.

Once the screen is dry, you can start cleaning the PAX. To clean the vaporizer tank, simply run a cotton swab through alcohol to remove any remaining residue. Then, run the vaporizer at its highest temperature for five minutes to completely remove the cleaning solution. Then, wipe down the entire device, making sure to wipe the vapor path as well. Then, put it back in the mouthpiece and reassemble it.

After removing the mouthpiece from your PAX, you can begin to clean the device. The most common areas for goop buildup are on the bottom of the oven and the mouthpiece. The best way to clean these parts is with a pipe cleaner or alcohol. Do not use anything else, as it may nullify the warranty. Once it is completely dry, reassemble the device and test it. You will notice that the device is much smoother and more reliable than ever before.

To clean the PAX, remove the mouthpiece. You can do this by using a multi-tool, which you can purchase from the company’s website. To clean the mouthpiece, you can use a solution of isopropyl alcohol or soap and water. However, you should not use any other products to clean the device because this could void the warranty. After cleaning the mouthpiece, allow it to dry for a few hours before you use it again.

Next, you should wipe down the mouthpiece. This part is the most vulnerable to dirt and grime. To clean it properly, you must remove the mouthpiece and then clean it with isopropyl alcohol. Never use other cleaning products because it will void the warranty. Always remember to follow the instructions to avoid any ruined parts. And never forget to check the instructions carefully. And if you’ve ever had any problems with your PAX, it is likely that you’ll have had a faulty mouthpiece.

Once you’ve cleaned the mouthpiece, you should also clean the rest of the device. You can clean it with alcohol or soap and water. Be sure not to use any other products because they could damage the PAX. If you’re using alcohol to clean it, you should be sure to follow the manufacturer’s instructions. If you’re using other products, make sure you follow the directions to avoid voiding the warranty.

After cleaning your PAX, you should remove the mouthpiece. You can purchase a multi-tool for this purpose at the PAX website. You can also use your fingernail to lift the mouthpiece out. To clean the mouthpiece, you can use soapy water and isopropyl alcohol. Don’t use other cleaning products as they will ruin the device’s warranty. If you do, you should dry the mouthpiece thoroughly before using it again.

After cleaning your PAX, you should burn off the alcohol. You should use a tool called the “Burn-off” to get rid of any leftover alcohol that may be inside the device. You can find the instructions on the PAX website. You should also dry the mouthpiece thoroughly before using the device. There are many steps to cleaning your PAX. The first step is to rinse the mouthpiece with isopropyl alcohol.