How to Clean a Nail Stamper

how to clean nail stamper

You may be wondering how to clean your nail stamper, but are not sure how to do it. First, remove any excess polish or other production oils. After that, wipe the tool with rubbing alcohol and allow it to dry completely. Afterward, use a cotton swab to wipe off the plate. Once the stamper has dried, you should apply a top coat to seal the design. Make sure that you float the top coat over the design to prevent it from smudging.

Next, clean the nail stamping plate. If you use a high-quality polish, you can use a cotton ball soaked in acetone. On the other hand, if you are using a low-quality polish, you should wash the nail stamper with warm water and soap. You should avoid using a sticky lint roller to clean the stamping head. Lastly, you should avoid using abrasives, such as sandpaper or lint.

Next, you should wipe the stamper using a soft cloth dipped in rubbing alcohol. If the polish is still wet, you can try using a lint roller. Remember to apply less polish than usual, or the stamper will not pick up enough polish. Besides, the scraper should be held at an angle to the plate when scraping off the excess polish. Otherwise, it can smear the polish on the plate. When applying the stamping polish, it is important to apply a thin layer on the nail plate.

Another important thing to remember when cleaning the stamper is to not rub it in too much polish. If the stamper is not wet when you start the process, it may be difficult to remove the stain. In this case, you can use a cotton ball soaked in acetone or rubbing alcohol. But make sure to avoid the sticky lint roller, as it can damage the jelly head. Then, you should wipe the stamper using a lint roller.

The most important thing to keep in mind when cleaning your nail stamper is to apply enough stamping polish on the plate before using it. It is important to not apply too much polish, as this will prevent the stamper from picking up the polish. You should also remember that not enough stamping polish will cause your stamper to pick up the polish properly. You should hold the scraper at a 45 degree angle to avoid scraping too much.

Using a cloth soaked in acetone will help you clean your nail stamper more easily. If you have a gel or acrylic nail polish, you can use it as long as you avoid using too much water. If you have a clear stamper, you can also use a lint roller to remove the accumulated oil. Just make sure that the lint roller is not sticky!

The most common way to clean nail stamper is to use warm water and acetone to remove the polish. If you use a gel polish, make sure you clean the stamper with acetone or alcohol first. If you don’t have either, you should apply the polish to the plate before using it. Then, scrape off excess polish with the scraper and let it dry. It’s important to use the correct tool and hold it at an angle.

When you’ve finished stamping, you can use acetone to clean the nail stamper. After you’ve scraped off the polish, you should use rubbing alcohol to clean the nail stamper. It’s also important to clean the jelly head. If you’re using a clear nail stamper, you should wipe it with a non-sticky lint roller to avoid damaging the jelly head.

It is best to clean the nail stamper after using it with polish. The cleaners should be made from alcohol and acetone. If you’re using acetone, use a lint roller to remove any excess polish. A scraper should be held at a 45 degree angle while scraping. If it’s holding it straight up, it may scrape too much. Then, part of the words or outline don’t pick up the stamping polish and jelly.