Keeping a soft top clean can be a challenge, especially if you drive through the woods and the soft top can get dirty. Falling seeds and leaves will leave stains on the top, making it difficult to keep it looking its best. You also don’t want to use a rotating brush or high-pressure spray, as these can tear the seams. To make sure your soft-top stays looking its best, check out our tips for cleaning the fabric.
First, make sure to use the correct type of jeep soft top cleaner. Some cleaners are meant to clean vinyl while others are meant for canvas. Before choosing a cleaning product, consider the materials that your soft top is made of. For vinyl, a specialized cleaner is recommended. For canvas, choose a cleaning product designed for the type of material you have. Many will work for both. When you purchase a cleaner, be sure to read the label to ensure you’re using the right one for your Jeep.
The best cleaning product for jeep soft tops is a vehicle fabric cleaner or auto shampoo. If you don’t like spraying products, you can use a paintbrush to apply the product. Make sure to avoid any contact with painted surfaces, as the cleaner may cause discoloration or cracks. After applying the cleaner, you should let it dry for 20 minutes. When finished, apply the protectant or color restorer to restore the luster of your soft top.
The soft top can be cleaned with a damp cloth, so it can be rinsed with water. If you want to use a power washer, use the nozzle on the hose and hold it two feet away from the top. After this, apply the top cleaner and wipe down the top with a soft cloth. Afterward, let it dry for a few minutes. If your top has a heavy layer of dirt, you can wash it with a specialized Jeep soft-top cleaning product.
You can use any type of cleaner that is suitable for cleaning a soft top. The best cleaner will be one that is made with a low-pH formula and anti-oxidants. The cleaner will leave no residue behind and is ideal for people who do not like spraying. After applying the cleaner, rinse the top thoroughly. It should take about 20 minutes to fully dry. If you don’t have a hose, use a paintbrush to wipe the fabric with hot water.
For a more gentle solution, try spraying a cleaning solution on a microfiber towel and rubbing it in gently. This will ensure the best protection for the top while allowing it to look its best. If you don’t like spraying, you can use a cleaner that has silicone in it. This product will keep the top looking its best. It will also protect the paint on the top and prevent it from getting scratched.
To clean a soft top, you must first remove the top completely. Start by removing the soft top’s hood. Next, you should wash the soft-top hood. It’s important to rinse the surface with hot water. Then, you can use a hose to rinse the entire car. You can also use a power washer to wash the roof. Just make sure to hold the nozzle about two feet away from the soft-top to avoid any spills.
Afterwards, you need to clean the soft-top’s fabric. You can purchase a cleaning solution to use on the top. You should use a small brush to clean the fabric. A small paintbrush is best for cleaning the soft-top. It should not be too large. The brush should be large enough to reach all corners of the top. After that, you can apply a coating of protective fluid on the top.
After cleaning the soft-top, you should apply a repairing solution to the top’s windows. Be sure to apply the solution with a plastic brush and then gently scrub it with a soft bristled cloth. The solution should be dry within about 20 minutes. Once the fabric is dry, you should apply masking tape to seal the edges. If you want to waterproof your soft-top, use a waterproofing solution. For most models, you can purchase the solution at an auto supply store.